1. Pay Attention to Installation Dimensions: Shower installation requires precise dimensions, especially for the hot and cold water pipes on both sides. A 15cm gap must be maintained between the pipes. Since the positions of the two pipes are already determined during the pre-installation of the hot and cold water pipes, the two water pipes should be installed to correspond to the two different pre-installed pipe positions, and the hot and cold water adjustment should be differentiated, with the cold water pipe on the left and the hot water pipe on the right.
2. Pay Attention to Installation Location: The overall height and left-right orientation of the shower need to be determined during installation. If the left-right position cannot be adjusted during installation, and the usable height cannot be determined, it will affect the convenience of use and may even result in the shower hose being too short for basic needs. The pipe connections during installation should also be optimized to avoid leaks.
3. Ensure secure installation
When fixing the shower, the degree of security should also be considered. If the connecting pipes cannot be secured during installation, or the tightness of the fixing screws cannot be determined, the shower may wobble from side to side during use, and there is even a high risk of it falling off.
